Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Brighton
Chimney repair in Brighton means something different depending on which side of town you’re in. A smoke backup in a 1920s bungalow near downtown has a different cause – and a different fix – than the same symptom in a 2005 tract home up in 80602. We work both, and we don’t guess which one you have. We inspect it, sweep it, and fix it, then show you what we found. Call (844) 785-0715. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Brighton Homeowners Call Hillcrest Chimney Sweep for Chimney Repair
We’re a chimney specialist, not a generalist who adds chimneys to a long list of trades. Every call is chimney work, which matters in a town with two very different kinds of housing stock. Our technicians have up to 9 years of experience working with professional-grade materials from brands chimney specialists trust, including DuraFlex liner systems and HeatShield ceramic resurfacing. We inspect, sweep, and repair under one roof, so you’re not coordinating a sweep from one company and a mason from another.
Brighton homeowners reach out because of smoke coming back into the room, a draft that won’t draw, water stains on the ceiling near the flue, or a home inspection that flagged something. We tell you exactly what your chimney needs – and nothing it doesn’t – and if the work can safely wait, we say so.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Brighton
Chimney Cap Replacement in Brighton comes up most often in the newer subdivisions, where a missing or rusted cap is the single most common source of water damage we find. A cap does two jobs: it keeps rain and snow out of the flue, and it keeps birds, squirrels, and raccoons from nesting in it. In a 2000s-era home in 80603, the factory-built firebox and damper corrode fast once water gets past a failed cap, and that corrosion is usually what makes the fireplace feel like it’s not drafting right. We fit caps and top-mount dampers from Gelco, Olympia Chimney, and Famco, sized to the actual flue opening rather than a generic hardware-store cover.
What the job involves
A cap replacement is usually a same-day job: pull the old cap, inspect the crown and the top few courses of brick or the prefab chase top for cracks or rust, set the new cap, and seal it. We check that the flue clears the cap by the right amount so it still drafts after the swap.
When a cap can wait
If the flue is parked for the season and the cap is only discolored, it can usually wait. If a cap is missing entirely and your chase top is open to the weather, that’s the one we don’t recommend deferring. Water in the flue is what starts the rot.
Chimney Liner Installation in Brighton
Chimney Liner Installation in Brighton takes two very different forms, and it helps to know which one your house was built for. In the historic 80601 core, a liner often means giving a century-old unlined brick flue a proper barrier for the first time. In the 2000s-era subdivisions, it usually means replacing a length of factory-built metal flue that has cracked or corroded and is now leaking. We handle both: HeatShield ceramic resurfacing for a flue that’s still structurally sound and just needs a smooth, sealed interior, and DuraFlex flexible liner installation when the original flue is deteriorated, out of size, or just over.
HeatShield resurfacing
HeatShield is a ceramic compound applied to the inside of the flue and shaped to the exact size it should be. It’s a professional repair for a flue with cracks or gaps that isn’t ready for a full liner. We recommend it only after a camera inspection shows the flue is sound enough to hold it.
DuraFlex liner replacement
A DuraFlex stainless liner goes in when the original flue is failing, undersized, or unlined. It carries the flue gases in its own channel, insulates properly, and gives the chimney a path to draft correctly even on a cold start. This is the full-replacement option, not a surface treatment.
Trusted Brands We Service in Brighton
We source materials exclusively from professional chimney-industry brands: DuraFlex liner systems, HeatShield ceramic resurfacing, Gelco and Famco caps and ventilation components, Olympia Chimney, and Copperfield. That means the parts on your chimney are the ones tradespeople use, not whatever fits off a hardware-store peg. We don’t stock parts in a warehouse; we order materials per job and schedule installation once they arrive, so turnaround stays tight. If you have an existing cap, damper, or liner from one of these brands, we know how to work with it and how to test it before recommending a replacement.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Brighton Homes
- Unlined historic flues in 80601. The early-1900s brick chimneys in Brighton’s older blocks often have no modern liner, so creosote and moisture soak right into the brick. That leads to spalling faces and a flue that won’t draft, and a standard sweep won’t fix it.
- Shared and adjacent flues. In Brighton’s denser older blocks, two appliances can share or sit close to the same stack. When a neighbor’s insert vents into a shared flue, you can get cross-contamination and a draft problem that looks like a flue issue but isn’t.
- Cracked prefab flue sections in newer homes. In 80602 and 80603, the factory-built metal fireplace flues sometimes crack or corrode at the joints. That lets carbon monoxide or smoke leak where it shouldn’t, and it’s easy to miss without a camera.
- Missing caps and water intrusion. A failed cap in a tract home lets water down into the firebox and damper, and the corrosion that follows is often the real cause of smoke backup. A cap is cheap; a rotted firebox is not.
Pricing for Chimney Repair in Brighton, CO
Chimney repair is priced per job by a written estimate, and the estimate is free. A typical chimney cap replacement in Brighton runs $250-$550, depending on the flue size, whether the chase top needs repair first, and which brand cap you choose. A HeatShield flue resurfacing typically runs $1,200-$2,600, and a DuraFlex liner installation typically runs $2,500-$5,500, because the price tracks flue height, liner diameter, and whether the old flue needs to come out first. Repointing or spalling brick repair usually runs $600-$2,000 depending on the number of courses involved. We give you a written number before any work starts, and we tell you what can safely wait.
We Also Serve Cities Near Brighton
We work the surrounding northern-metro communities too: Commerce City, Fort Lupton, Frederick, and Firestone. The same high-plains winter swing that hits Brighton drives creosote buildup across the whole corridor, so if you’re just outside town, chimney repair is still within reach. Call (844) 785-0715 and we’ll confirm your address and book the visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Brighton, CO – Our Local Coverage Area
We serve Brighton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Brighton
Because the original brick flues in Brighton’s historic core often have no liner at all, and any crack or cap repair over an unlined flue just hides the problem. Creosote and moisture soak into the porous brick, causing spalling and draft failure that a sweep can’t fix. We confirm the condition with a camera inspection first, then recommend HeatShield resurfacing or a DuraFlex liner. Call (844) 785-0715 for an exact quote – estimates are free.
Smoke or a chemical smell that shows up when your fireplace is off, or a draft that pulls backward, are the usual signs in a Brighton attached home with shared or adjacent flues. A camera inspection and a smoke test tell us whether the stack is shared and how the gases are moving. If cross-contamination is confirmed, the fix is usually separating the flues or capping the unused one. Call (844) 785-0715 and we’ll book the inspection.
Third-degree creosote – the hard, glazed layer – is common in older Brighton chimneys that have burned a lot of cottonwood and pine. That matters because standard sweep brushes slide right over it, so it gets misdiagnosed as “clean enough” when it isn’t. We recognize it and switch to chemical or rotary methods before recommending any liner work. Call (844) 785-0715 to schedule a sweep and a look.
Yes. A 2000s tract home in 80602 or 80603 almost always has a factory-built metal fireplace with an insulated flue, so the repair path is different: we test the flue sections and the cap, look for cracking or corrosion, and address water intrusion before anything else. A historic Brighton home with a masonry flue gets a camera inspection of the brick itself first. Same smoke-backup symptom, different cause, different fix. Call (844) 785-0715 for a free estimate.
Spring is the short window before the summer thunderstorm and hail season, and it’s the easiest time to get roof access before the heat builds. Roof access at chimney height is the real constraint on this work, so doing it in spring means fewer weather delays and less risk on the ladder. It also means your chimney is ready before the first burn. Call (844) 785-0715 to book a spring visit – estimates are free.
Written by the team at Hillcrest Chimney Sweep.