Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Commerce City
Commerce City chimneys carry more than smoke. They hold decades of prairie grit, cottonwood fluff, and creosote that settled in before most of us ever saw the house. If you own one of the older ranches or bungalows here, a routine sweep is also your best chance to catch structural problems early. We handle chimney sweep work across Commerce City with the inspection, cleaning, and repair parts all under one company, so a sweep doesn’t become three separate contractors. Our technicians have up to 9 years of experience, and we tell you what your chimney needs and nothing it doesn’t. Call (844) 785-0715. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Commerce City Homeowners Call Hillcrest Chimney Sweep for Chimney Sweep
Commerce City sits downwind of the Rocky Flats and Suncor refinery corridor and I-270, with the South Platte nearby, and that shapes the work. The high-desert temperature swings crack mortar joints, the dry windy springs push grit and debris into caps, and winter inversions trap smoke close to the valley floor so soot and creosote build faster. That’s why cleaning here is as much about clearing decades of accumulated grit from older masonry and prefab chimneys as it is routine sweeping. We know the difference because these are the conditions we work in across Commerce City every season.
We’re a chimney specialist, not a generalist. We inspect it, sweep it, and fix it all under one roof, using professional-grade materials from the brands chimney specialists trust: DuraFlex for flexible liner systems, HeatShield for ceramic liner resurfacing, and Olympia Chimney for caps and ventilation components. One point of contact from inspection through repair, no handoffs. We hold a strong local reputation in Commerce City, and we tell you plainly when work can safely wait. That matters most with older flues, where the wrong recommendation can cost thousands.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Sweep Services in Commerce City
Chimney Sweep Services in Commerce City center on clearing creosote and debris, then checking the whole system while we’re there. Most jobs combine a brush sweep, a Level 1 inspection, and a look at caps and the smoke chamber for packed dust. A typical annual sweep in Commerce City runs $150 – $290, and a Level 2 camera inspection with a sweep runs $250 – $450. Prices are estimates; the written estimate you approve sets the final price.
Annual Sweep and Creosote Removal
A yearly sweep clears first- and second-degree creosote before it hardens. In Commerce City’s older ranch homes, fall cleaning before the heating season is the peak window, and it’s worth booking ahead. Creosote removal on a heavily coated flue costs more, running $250 – $500.

Level 1 and Level 2 Inspections
A Level 1 inspection covers the readily accessible parts of the chimney and firebox. When a flue is unlined, the appliance venting is suspect, or you’ve just bought the home, we move to a Level 2 inspection with a camera scan and document what we find on video.

Chimney Cleaning in Commerce City
Chimney Cleaning in Commerce City goes deeper than a brush and a vacuum when the flue hasn’t been touched in years. We clear soot from the firebox and smoke chamber, check the damper, and scan for spalling or mortar deterioration caused by freeze-thaw. A standard fireplace cleaning here runs $180 – $320, with soot-heavy or heavily soiled smoke chambers running $300 – $550. Older homes with packed caps and debris-filled chambers sit at the higher end.
Fireplace and Soot Removal
Soot removal means cleaning the firebox surfaces and the smoke chamber where ash collects and draft weakens. It’s the step most skipped on a quick clean, and on an older masonry fireplace it’s the one that shows how much the system has been through.
Damage Found During Cleaning
Cleaning is the moment we catch damper problems, firebox spalling, or missing liner sections. We photograph what we find so you can see it yourself, and we’re clear about what can wait and what shouldn’t.
Trusted Brands We Service in Commerce City
Our material work rests on brands we trust for chimney-specific jobs. We install DuraFlex flexible liner systems when a flue is deteriorated or undersized, and we use HeatShield ceramic resurfacing to repair liners rather than replace them outright. For caps, covers, and ventilation hardware, we work with Olympia Chimney and Famco. These are trade-level products, not off-the-shelf improvisations, chosen because they hold up to Commerce City’s dust, wind, and freeze-thaw. We don’t claim to stock them locally, but we source them for the job, so turnaround stays tight and you get the right part the first time, at Commerce City jobs from the older core out toward the newer infill.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Commerce City Homes
- Cracked clay-tile flue joints. In the 80022 ranches, freeze-thaw cycles open the mortar joints on original clay-tile flues. Cracks that go unseen let heat and gases reach the surrounding structure, which is why the camera check matters.
- Debris-packed caps. Wind-driven prairie dust and cottonwood fluff from the South Platte corridor pack the cap and restrict draft. Treating that as ordinary soot and brushing past it is a mistake.
- Spalling fireboxes and worn dampers. Decades of trapped soot and moisture cause spalling on older masonry fireboxes. Sweeping without checking the damper and firebox surface misses the damage.
- Rusted or undersized prefab flues. A 1950s prefab metal flue may look fine but have an original liner rusted through or undersized for a modern appliance. A Level 2 inspection tells you whether it’s still serviceable.
Pricing for Chimney Sweep in Commerce City, CO
We price per job by written estimate, and the estimate is free. A typical annual sweep in Commerce City runs $150 – $290. Add a Level 2 camera inspection and you’re looking at $250 – $450 for the combined visit. Heavy creosote or soot removal pushes a job to $250 – $500, and deep firebox and smoke chamber cleaning lands around $300 – $550. What moves the number is the state of the flue, not the address: cracked joints, unlined flues, and packed caps all take more time and care. Nothing is recommended without camera evidence you can see for yourself, and we’re honest about work that can safely wait. Call (844) 785-0715 for an exact quote.
We Also Serve Cities Near Commerce City
We cover chimney work beyond the older ranches of Commerce City. Our area includes neighboring town Westminster, along with Brighton, Cherry Hills Village, and Greenwood Village. Same approach everywhere: inspect, sweep, and repair under one company, with camera evidence behind anything we recommend. If you’re on the edge of Commerce City and not sure we reach you, call and we’ll tell you straight.
Serving Commerce City, CO – Our Local Coverage Area
We serve Commerce City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Commerce City
Yes, if the flue is unlined or the appliance venting is suspect, a camera inspection belongs in the visit. In the 80022 ranches the original clay tiles often have cracked joints from freeze-thaw cycles, and a camera scan shows you the actual cracks rather than a guess. A routine sweep here doubles as a structural check that most newer housing stock never needs. Call (844) 785-0715 for an exact quote, and estimates are free.
Once a year is the standard, even with light use. Creosote and debris build from what you do burn, and the Front Range’s wind-driven dust and cottonwood fluff clog caps and flues whether or not the fireplace runs. An annual look catches freeze-thaw cracks early, before they turn into a bigger repair.
First-degree creosote is light, flaky, and brushes off easily. Second-degree is glazed and harder to remove; third-degree is the thick, hardened kind that takes real effort and carries more fire risk. In Commerce City’s older flues with inversion-trapped soot, buildup skews heavier, so the sweep matters. Call (844) 785-0715 and we’ll tell you where yours stands.
Not always. Packed caps restrict draft, and treating the debris as ordinary soot can leave the smoke chamber and cap still clogged. We clear the cap and chamber and check the liner underneath. It’s a fire-safety issue as much as a cleaning one.
No. A new liner is only recommended when we can show you the evidence: cracked joints, spalling, or missing sections documented on camera. When a HeatShield resurfacing will do the job, we say so, and when a DuraFlex liner is the right call, we explain why. Call (844) 785-0715 for a free estimate.
Get your Commerce City chimney checked before the heating season. Call (844) 785-0715. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and the price is set per job by the written estimate.
Written by the team at Hillcrest Chimney Sweep.